Render
 |
| Masonry Render |
 Masonry Render is a pre-bonded, polymer modified cement based render which requires only the addition of clean water. It is suitable for interior and exterior use over all standard masonry substrates such as clay bricks and concrete blocks and can be applied by trowel or pump machine.
Masonry Render contains unique powdered bonding agents which ultimately:
- speed up and simplify the on-site mixing process;
- increase adhesion to all suitable, properly prepared substrates;
- guarantees the correct amount of bond every time - whether applied by hand or machine.
Masonry Render provides an excellent surface for the application of acrylic textures and paints. It has great 'straightening qualities', shows great tear resistance for screed-ability and has excellent 'come back' qualities when floating and finishing.
Masonry Render represents real cost and time savings compared to standard cement render and is available in a 20kg bag (48 bags per pallet).
|
| Traditional Render |
 Traditional Render is a "fine finish" pre-bonded, polymer modified cement based render which requires only the addition of clean water. Like Masonry Render, Traditional Render contains unique bonding agents which increase adhesion, speed up and simplify the on-site mixing process and guarantee
the same quality, integrity and longevity of the render.
Traditional Render has excellent floating and finishing qualities and can be over-coated with all acrylic textures and paints.
Traditional Render is suitable for interior and exterior use and can be applied by hand or machine.
Available in a 20kg bag (48 bags per pallet).
|
| EP Render |
 EP Render is a high quality, polymer modified, cement based render which requires only the addition of clean water. Developed for application by hand or
machine, EP Render is suitable for use over RSA approved polystyrene building
systems, AAC Hebel and masonry substrates.
EP Render has been developed to deal with the increased movement associated
with Polystyrene substrates, providing:
- A less rigid formulation (slightly less cement) than conventional pre-bagged renders.
- Softer less rigid bonding agents (glue).
- Well graded sand for a more compacted render formulation improving impact resistance and strength (when compared with conventional pre-bagged renders).
- Improved cohesion of render.
- Long term coating integrity for masonry and lightweight substrates when used as part of a full RSA coating system.
Suitable for interior and exterior use, EP Render has an extended "hang time"
for greater productivity and high early hardness, anti sag formulation for faster
straightening, excellent "come back" qualities for quicker, easier floating, as well
as increased adhesion and cohesion for long term peace of mind.
Available in a 20kg bag (48 bags per pallet).
|
|
|
