Masonry Renders
RSA’s Masonry Renders are easy to apply, pre-bonded, polymer modified, cement based renders which require only the addition of clean water. They are suitable for interior/exterior use and can be applied by hand or machine. They are available in rapid, medium and slow setting versions to enable YOU TO CHOOSE THE SET TIME! |
|
|
Masonry Render - MR 60 |
A rapid setting (approx. 60 minutes) masonry render for small jobs or for cooler climate conditions - where a product with an extended hang time would delay the finishing process. |
- Clay bricks
- Concrete blocks
- Concrete slab edges
- Off-form concrete
- Concrete tilt panels.
|
- Rapid Setting for quicker application of small jobs.
- Superior darbying and tear resistant screedability.
- Superior adhesion properties.
- Machine or hand application.
|
20kg bag |
|
|
Masonry Render - MR 120 |
A medium setting (pot life approx. 120 minutes) masonry render for all occasions. |
- Clay bricks
- Concrete blocks
- Concrete slab edges
- Off-form concrete
- Concrete tilt panels.
|
- Good all purpose render.
- Superior darbying and tear resistant screedability.
- Superior adhesion properties.
- Machine or hand application.
|
20kg bag |
|
|
Masonry Render – MR 180 |
A slow setting (approx. 180 mins or 3 hrs) masonry render ideal for
large jobs where a product with an extended ‘hang time’ assists in the application and finishing of broad wall areas.
. |
- Clay bricks
- Concrete blocks
- Concrete slab edges
- Off-form concrete
- Concrete tilt panels.
|
- Ideal for large jobs due to extended hang time.
- Two coat hand trowel applications.
- Increased adhesion.
- Superior trowelability.
- Machine or hand application.
|
20kg bag |
|
|
Traditional Render |
a fine grain, pre-bonded, polymer modified, cement based render which offers a traditional finish. |
- Clay bricks
- Concrete blocks
- Concrete slab edges
- Off-form concrete
- Concrete tilt panels.
|
- Offers a traditional finish with all the advantages of modern renders
- An extended ‘hang time’ offers
- productivity and high early hardness.
- Tear resistant screedability.
- Excellent ‘come back’ qualities for easy floating and finishing.
|
20kg |
|
|
EP Render |
a pre-bonded (10% wet bond equivalent), polymer modified, cement based render made especially for expended polystyrene substrates. |
- RSA approved polystyrene substrates
- AAC Hebel
- Masonry substrates
|
- Increase adhesion and cohesion
- Increased impact resistance and polystyrene compatability.
- Extended hang time allows more time to ‘bed in’ mesh.
- A sag resistant render – for faster straightening
- Excellent come back qualities for quicker & easier floating.
|
20kg bag |
|
|
Flexi Render (previously Acrylic Render) |
a ready to use, 100% pure acrylic based, sand enhanced coating offering superior flexibility. |
- FC sheeting
- Polystyrene building systems
|
- excellent adhesion a tough knock resistant surface flexibility (to overcome shrinkage and minor cracking)
|
15 litre bucket |
|
|
Skim Coat |
A pre-blended polymer modified cement render which can be applied in coats as thin as 2mm. |
|
- Machine or hand application
- Easy & quick to apply
|
15 litre bucket |
|
|
